Pontoon Fender

Got a workshop? We can handle bulk orders. Simply choose a Full Carton quantity and save!

Quantity buys will be sent as a continuous length.

Pontoon fender is a buffer product to protect against damage on large sea going vessels such as pontoon's and jetty's. This product is made from  PVC and is UV treated and is non marking. Once ordered you will receive as a single length and is only available in WHITE.

FURTHER INFORMATION:

Our PVC Pontoon Fender and Gunwale Products require preparation before installing onto the desired project.

Due to the way these products are manufactured, they do need heat applied to remove any curls which have formed from transportation between the manufacturer, seller and customer due to being cooled. 

Please note these curls could appear more defiant in cooler areas - image provided above of installation without heat applied to the product. 

Product Installation: 

The product can be installed by direct fixing with a screw or by the application of a Marine Grade Adhesive. 

To assist with installation, the product can be heated to 60 Degrees Celsius in an air circulation oven for a MINIMUM of 60 minutes and a MAXIMUM of 75 minutes.

NOTE 1: When direct fixing a Marine Grade Stainless Steel product must be used

NOTE 2: Heatproof gloves must be worn when handling the heated product

Product Storage:

The product should be stored out of direct sunlight and protected from dirt, dust etc.

Maintenance:

The product can be cleaned with a Marine Wash/Wax or in case of stains a mild abrasive cleaner such as JIF can be used.

We do not recommended cleaning with thinners, Petrol or Solvents.