Gunwale Body / Gunwale Infill
Quantity buys will be sent as a continuous length.
Gunwale Rubber is a product used on the edges of boats, this product is specifically designed for an edge where two surfaces meet together.
Product Installation:
The product can be installed by direct fixing with a screw or by the application of a Marine Grade Adhesive.
To assist with installation, the product can be heated to 60 Degrees Celsius in an air circulation oven for a MINIMUM of 60 minutes and a MAXIMUM of 75 minutes.
NOTE 1: When direct fixing a Marine Grade Stainless Steel product must be used
NOTE 2: Heatproof gloves must be worn when handling the heated product
Product Storage:
The product should be stored out of direct sunlight and protected from dirt, dust etc.
Maintenance:
The product can be cleaned with a Marine Wash/Wax or in case of stains a mild abrasive cleaner such as JIF can be used.
We do not recommended cleaning with thinners, Petrol or Solvents.
